A Design of Reactor for The Production of PbO Particles
DOI:
https://doi.org/10.31599/jies.v3i2.1656Abstract
The aim of this study was to design and analyze the batch reactor designs to produce PbO particles on an industrial scale. The method used in this research is to perform computational analysis and calculation of the reactor and its stirrer as well as the mass balance as the basis for calculations using the Microsoft Excel application. To produce PbO particles on an industrial scale (10,000× laboratory scale), are required two reactors and two stirrers. The calculation results show that the first reactor has a volume of 11.2334 ft3 with a height of 3.2219 ft and requires one stirrer with a power of 163 Hp, while the second reactor has a volume of 7.3576 ft3 with a height of 11.9503 ft and requires one stirrer with power 191 Hp. The results of this computation and analysis can be applied to the design and analysis of reactor performance as a learning medium and operating mechanism in a production system.
Downloads
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Journal of Industrial and Engineering System

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.