Perbaikan Kualitas Collapsible Tube Printing Dengan Metode Failure Mode And Effetc Analysis

Authors

  • Agus Eko Prayitno Universitas Bhayangkara Jakarta Raya
  • Murwan Widyantoro Universitas Bhayangkara Jakarta Raya
  • Yayan Saputra Universitas Bhayangkara Jakarta Raya

Abstract

The companies always try to meet customer demands, so they must be able to provide good quality products. Quality control is always carried out by manufacturing companies in order to achieve zero defect. Collapsible tube is one type of product that is produced by the alumunium tube packaging manufactured PT XYZ. The purpose of this research is to find out what factors are causing the reject, especially in printing machines using the Failure Mode and Effect Analysis (FMEA). The problem that becomes the focus for improvement is reject colors outside the standard. Where the reject is the highest in the collapsible tube production process during November 2019. This research is concerned with identifying and preventing as many failure modes as possible as well as finding the source and root causes of quality problems. Based on the results of production data during November 2019 the percentage of rejects reached 7,6%, while the Quality Control Department set a tolerance limit of 5%. So if seen from this percentage there is a difference of 2,6% which must be studied more deeply so that the percentage of rejects falls from the previous number.

Downloads

Download data is not yet available.

Downloads

Published

— Updated on 2021-12-28