Pengendalian Kualitas Dengan Metode Statistical Process Control (SPC) Pada Line Produksi Semi Solid
DOI:
https://doi.org/10.31599/q7taxw33Kata Kunci:
Quality Control, Statistical Process Control, Semi-SolidAbstrak
Quality control for rejected/defective products at PT. Paragon Technology and Innovation must be improved to maintain customer trust and satisfaction. PT. Paragon Technology and Innovation is a company operating in the cosmetics industry. One of the departments in the company, the semi-solid plant, faces challenges where there are a significant number of rejected/defective products, leading to a high reprocessing rate performed by employees to meet the company's specifications for net product weight. The research to be conducted will utilize the Statistical Process Control (SPC) method for quality control and process documentation. This will enable further improvement steps to be taken to maintain process quality. This research indicates significant improvements in quality control processes aimed at enhancing customer and consumer satisfaction while reducing lead time in the production process. This is demonstrated by a Cp value of 0.76 and a Cpk value of 0.55, which align with the company's specification standards.
Unduhan
Referensi
Afnina, A., & Hastuti, Y. (2018). Pengaruh Kualitas Produk terhadap Kepuasan Pelanggan. Jurnal Samudra Ekonomi Dan Bisnis, 9(1), 21–30. https://doi.org/10.33059/jseb.v9i1.458
Andriani, D. P., Rizky, D. A., & Setiaji, U. (2017). Pengendalian Kualitas Kadar Air Produk Kerupuk Udang Berbasis SNI Menggunakan Statistical Quality Control Method Risk Analysis View project Product Design and Development View project. Seminar Dan Konferensi Nasional IEDC, May, 98–107. https://www.researchgate.net/publication/330532901
Arniza Nilawati. (2018). Pengaruh Kualitas Produk Terhadap Kepuasan Konsumen Teh Oucuk Harum Di Fakultas Ekonomi Dan Bisnis Univertas Muhammdaiyah Palembang. Jurnal Manajemen Dan Bisnis, 430.
Hendrawan, E., Susanto, H. V., Susanto, S. A. J., & Rahardjo, B. (2017). Analisa Kapabilitas Proses untuk Proses Injeksi dan Blow Moulding. Jurnal Rekayasa Sistem & Industri (JRSI), 4(01), 16. https://doi.org/10.25124/jrsi.v4i01.170
Puspasari, A., Mustomi, D., & Anggraeni, E. (2019). Proses Pengendalian Kualitas Produk Reject dalam Kualitas Kontrol Pada PT. Yasufuku Indonesia Bekasi. Widya Cipta, 3(1), 71–78. https://doi.org/https://doi.org/10.31294/widyacipta.v3i1.5088
Rachman, T. (2014). Analisa Penyimpangan Dan Capability Process (Cp). 1–6.
Safwadi, Yasra, R., & Haulian, B. A. (2014). Penerapan Statistical Process Pada Proses Produksi untuk Meningkatkan Yieldoutput Produksi (Study kasus di PT Sanmina Sci Batam). Profesiensi, 2(1), 52–63.
Sihombing, M. I. (2017). Pengaruh Pengendalian Kualitas Bahan Baku dan Pengendalian Kualitas Proses Produksi terhadap Kuantitas Produk Cacat dan Dampaknya pada Biaya Kualitas ( Cost of Quality ). 8(2), 34–41.
Suhartini, N. (2020). Penerapan Metode Statistical Proses Control (Spc) Dalam Mengidentifikasi Faktor Penyebab Utama Kecacatan Pada Proses Produksi Produk ABC. Jurnal Ilmiah Teknologi Dan Rekayasa, 25(1), 10–23. https://doi.org/10.35760/tr.2020.v25i1.2565
Wibowo, P. A. (2016). Analisis Pengendalian Kualitas Untuk Mengurangi Tingkat Kebocoran Produk Bumbu Irmb ( Real Meat Balado ) Departemen Retort Gudang Finish Good Dengan Menggunakan Metode Statistical Processing Control.
_-_Copy1.jpg)
